2007-2008 Toyota Tundra 3-Inch Leveling Kit

P/N 903025

This 3" lift and level kit is the newest available for the 2007-08 Toyota Tundra. The kit levels the truck by lifting the front 3" and the rear 1" - this creates the lifted level look everyone loves but still retains all the stock suspension qualities Toyota spent so much time engineering into their new 2007-08 Tundra 4x2 and 4x4 pickups.

Our factory ride lift and level kit fixes the "tail in the air" stance that new 2007-08 Toyota Tundra 4x2 and 4x4 pickup trucks come with.

We engineered this kit to be a full 3" and did the detail work to make sure your new Toyota Tundra only looks different, all the engineering, reliability and quality you have come to know with Toyota products is still first and foremost.

We have included everything you will need to make sure of this...

• We made sure to offset the top and bottom plates before we sandwiched the tubing and created the new strut cap to ensure proper spring clearance

• We made sure to include a differential drop so that on the 4x4 models your CV joints would last as long as Toyota designed them too

• We made sure to include a bump stop drop so that the shock doesn’t use the internal bump stop, that the bump stop on the frame is doing the job it was designed to do

• We made sure to use cad plated U-bolts and welded and powder coated blocks so that you truck always looks new and the finish quality is the same as the parts Toyota used on the new Tundra 4x2 and 4x4 pickups

The 2007-08 Toyota Tundra 4x2 and 4x4 lift and level kit installs in 2-3 hours, doesn't sacrifice the smooth stock ride quality and can be installed with hand tools. Our kit is made in the USA out of the finest steel, and we supply a complete kit, with instructions, alignment specs and dedicated support.

By making sure you use a Truxxx Lift and Level kit on your new 2007-08 Toyota Tundra 4x2 or 4x4 pickup, you can be assured that the kit will:

• Increase ground clearance over traditional bracket type lift kits even without the use of larger wheels and tires for those interested in getting the most out of their truck for recreational or construction use.

• Ride Quality - The Truxxx kit does not change preload and maintains the stock smooth ride. Other kits get their lift from increasing preload on the spring. This means that the ride is harsher and less compliant. This is a big issue for many consumers.

• Installation of the Truxxx kit requires no disassembly of the strut. Other kits require the disassembly of the strut in order to install their kit. This means that a strut compressor is required (special tools) which not every shop has. Also, if the strut is reassembled slightly crooked (no positive indexing on the strut!) then the assembly will have to be disassembled and straightened. This happens fairly often. Because of the strut disassembly/reassembly the installation time is about DOUBLE that of the Truxxx kit.

Truxxx Lift/Level kit does not require any after installation maintenance (no need to re-torque the mounting bolts ) Other kits must be re-torqued after 6-12,000 miles because of its polyurethane construction (plastic flexes under load).

• Maintains stock ride quality

• Allows for up to 33" tires to fit without rubbing

• Kit can be installed in two - three hours

• Alignment specs provided

• Truck can be returned to stock after lease term is up

• Made in the USA

2007-2008 Toyota Tundra

3-Inch Lift Kit

Price $247.25

2004-07 Toyota Tundra Double Cab Lift Kit

P/N 909015

Fits 4x2 and 4x4 trucks

This lift kit is the newest available for the 2004 Toyota Tundra Double Cab. The kit lifts the front of the truck 2.75" - which brings the front and rear of the truck to the same height. Our lift kit fixes the "tail in the air" stance that new 2004 Toyota Tundra Double Cab trucks come with.

We have a different kit for the Toyota Tundra Access Cab models, since they need a 1" rear lift. Go to 909025

The kit installs in two hours, doesn't sacrifice the smooth stock ride quality and can be installed with hand tools. Our kit is made in the USA out of the finest steel, and we supply a complete kit, with instructions, alignment specs and dedicated support.

• Maintains stock ride quality

• Allows for up to 33" tires to fit without rubbing

• Kit can be installed in two hours

• Alignment specs provided

• Truck can be returned to stock after lease term is up

• Made in the USA

2004-2007 Toyota

Tundra Double Cab

2.75-Inch Leveling Kit

Price $171.50

1999-2006 Toyota Tundra Access Cab 4x2 and 4x4 Lift Kit

P/N 909025

This lift kit is the newest available for the Toyota Tundra . The kit levels the front of the truck 3", and the rear 1" - which brings the front and rear of the truck to the same height. Our lift kit fixes the "tail in the air" stance that new Toyota Tundra trucks come with.

The kit installs in 2-3 hours, doesn't sacrifice the smooth stock ride quality and can be installed with hand tools. Our kit is made in the USA out of the finest steel, and we supply a complete kit, with instructions, alignment specs and dedicated support.

• Maintains stock ride quality

• Allows for up to 33" tires to fit without rubbing

• Kit can be installed in two hours

• Alignment specs provided

• Truck can be returned to stock after lease term is up

• Made in the USA

1999-2006 Toyota

Tundra Access Cab 4x2 & 4x4

3-Inch Lift Kit

Price $247.25

2005-2008 Toyota Tacoma PreRunner & 4x4 Lift Kit

P/N 905011

Part #905011 - Fits 6 Lug chassis, coil-over. This is a FRONT ONLY kit and includes differential drop.

100% made in the USA 1/4" steel construction, laser cut and welded to precision tolerances.

Each 3" kit contains two strut mounts (including nuts and studs), full color instructions and complete alignment specs as well as lifting blocks and u-bolts for the rear-- all packed into a 7"x7" box weighing 9 pounds

Allows fitting of up to 33" tires (285/70 x 17) on stock offset wheels, 32" on aftermarket wheels with similar to stock offset (test fit tire and wheel package as every company uses a different measuring tape).

Increases ground clearance over traditional bracket type lift kits even without the use of larger wheels and tires for those interested in getting the most out of their truck for recreational or construction use.

Ride Quality - The Truxxx kit does not change preload and maintains the stock smooth ride. Other kits get their lift from increasing preload on the spring. This means that the ride is harsher and less compliant. This is a big issue for many consumers.

Installation of the Truxxx kit requires no disassembly of the strut.Other kits require the disassembly of the strut in order to install their kit. This means that a strut compressor is required (special tools) which not every shop has. Also, if the strut is reassembled slightly crooked (no positive indexing on the strut!) then the assembly will have to be disassembled and straightened. This happens fairly often. Because of the strut disassembly/reassembly the installation time is about DOUBLE that of the Truxxx kit.

Truxxx Lift/Level kit does not require any after installation maintenance (no need to re-torque the mounting bolts ) Other kits must be re-torqued after 6-12,000 miles because of its polyurethane construction (plastic flexes under load)

2005-2008 Toyota

Tacoma PreRunner & 4x4

3-Inch Leveling Kit

P/N 905011

Price $171.50

2005-2008 Toyota Tacoma PreRunner and 4x4 Pick-up

P/N 905015

Part #905015 - Fits 6 Lug chassis

100% made in the USA 1/4" steel construction, laser cut and welded to precision tolerances.

Each 3" kit contains two strut mounts (including nuts and studs), full color instructions and complete alignment specs as well as lifting blocks and u-bolts for the rear-- all packed into a 7"x7" box weighing 9 pounds

Allows fitting of up to 33" tires (285/70 x 17) on stock offset wheels, 32" on aftermarket wheels with similar to stock offset (test fit tire and wheel package as every company uses a different measuring tape).

Increases ground clearance over traditional bracket type lift kits even without the use of larger wheels and tires for those interested in getting the most out of their truck for recreational or construction use.

Ride Quality - The Truxxx kit does not change preload and maintains the stock smooth ride. Other kits get their lift from increasing preload on the spring. This means that the ride is harsher and less compliant. This is a big issue for many consumers.

Installation of the Truxxx kit requires no disassembly of the strut.Other kits require the disassembly of the strut in order to install their kit. This means that a strut compressor is required (special tools) which not every shop has. Also, if the strut is reassembled slightly crooked (no positive indexing on the strut!) then the assembly will have to be disassembled and straightened. This happens fairly often. Because of the strut disassembly/reassembly the installation time is about DOUBLE that of the Truxxx kit.

Truxxx Lift/Level kit does not require any after installation maintenance (no need to re-torque the mounting bolts ) Other kits must be re-torqued after 6-12,000 miles because of its polyurethane construction (plastic flexes under load)

2005-2008 Toyota Tacoma

PreRunner & 4x4 Pick-up

3-Inch Lift Kit

P/N 905015

Price $247.25

1996-2004 Toyota Tacoma PreRunner and 4x4 Pick-up 3" Lift Kit

P/N 909031

100% made in the USA 1/4" steel construction, laser cut and welded to precision tolerances.

Each 3" kit contains two strut mounts (including nuts and studs), full color instructions and complete alignment specs -- all packed into a 7"x7" box weighing 9 pounds

Allows fitting of up to 33" tires (285/70 x 17) on stock offset wheels, 32" on aftermarket wheels with similar to stock offset (test fit tire and wheel package as every company uses a different measuring tape).

Increases ground clearance over traditional bracket type lift kits even without the use of larger wheels and tires for those interested in getting the most out of their truck for recreational or construction use.

Ride Quality - The Truxxx kit does not change preload and maintains the stock smooth ride. Other kits get their lift from increasing preload on the spring. This means that the ride is harsher and less compliant. This is a big issue for many consumers.

Installation of the Truxxx kit requires no disassembly of the strut. Other kits require the disassembly of the strut in order to install their kit. This means that a strut compressor is required (special tools) which not every shop has. Also, if the strut is reassembled slightly crooked (no positive indexing on the strut!) then the assembly will have to be disassembled and straightened. This happens fairly often. Because of the strut disassembly/reassembly the installation time is about DOUBLE that of the Truxxx kit.

Truxxx Lift/Level kit does not require any after installation maintenance (no need to re-torque the mounting bolts ) Other kits must be re-torqued after 6-12,000 miles because of its polyurethane construction (plastic flexes under load).

Now includes front differential drop kit.

1996-2004 Toyota

Tacoma PreRunner & 4x4 Pick-up

3-Inch Leveling Kit

P/N 905015

Price $171.50

1996-2004 Toyota Tacoma PreRunner and 4x4 Pick-up 3" Lift Kit

P/N 909035

100% made in the USA 1/4 steel construction, laser cut and welded to precision tolerances.

Each 3" kit contains two strut mounts (including nuts and studs), full color instructions and complete alignment specs as well as lifting blocks and u-bolts for the rear-- all packed into a 7"x7" box weighing 9 pounds

Allows fitting of up to 33" tires (285/70 x 17) on stock offset wheels, 32" on aftermarket wheels with similar to stock offset (test fit tire and wheel package as every company uses a different measuring tape).

Increases ground clearance over traditional bracket type lift kits even without the use of larger wheels and tires for those interested in getting the most out of their truck for recreational or construction use.

Ride Quality - The Truxxx kit does not change preload and maintains the stock smooth ride. Other kits get their lift from increasing preload on the spring. This means that the ride is harsher and less compliant. This is a big issue for many consumers.

Installation of the Truxxx kit requires no disassembly of the strut. Other kits require the disassembly of the strut in order to install their kit. This means that a strut compressor is required (special tools) which not every shop has. Also, if the strut is reassembled slightly crooked (no positive indexing on the strut!) then the assembly will have to be disassembled and straightened. This happens fairly often. Because of the strut disassembly/reassembly the installation time is about DOUBLE that of the Truxxx kit.

Truxxx Lift/Level kit does not require any after installation maintenance (no need to re-torque the mounting bolts ) Other kits must be re-torqued after 6-12,000 miles because of its polyurethane construction (plastic flexes under load).

Now includes front differential drop kit.

1996-2004 Toyota

Tacoma PreRunner & 4x4 Pick-up

3-Inch Lift Kit

P/N 905035

Price $247.25