Ring & Pinion Packages at TRS Fab & Off-Road

Home About Us Contact Us Purchase & Return Policy Privacy Policy

Ring & Pinion Packages

We've put together an assortment of Gear Packages for Ford and Jeep enthusiasts. Packages can either be purchased with front and rear ring and pinions and complete master installation kits, or just the ring and pinions themselves.

The installation kits come with quality Timken Bearings and races along with high quality seals and small parts. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. The Yukon kit's also come with very detailed instructions on setting up your ring and pinions.

*Sales Tax: California, Tennessee and Washington residence are required to pay their local sales tax based on the address they provide when ordering Yukon gear packages. We will email you with an invoice for you to pay the sales tax on-line. This does not apply to Genuine Gear orders.

Notice: If you're not sure which package you need, please contact us before ordering by filling out our Item Request Form. If you order the wrong gear package (example, standard cut instead of reverse cut) and need to exchange them, you may not get a full refund if they're marked/damaged from installation and a restocking fee may be imposed from our supplier irregardless of condition.

Please use the message/comments section of the check out to indicate what vehicle your axles were originally installed in.

** Prices / Shipping Are For Lower 48 States Only **

Please list your phone number in the notes when you check out. We need it for our shipper.

Item

Description

With Installation Kits

Without Installation Kits

Kit may be different than shown

1990-1997 Ford Ranger 8.8/Dana 35 4.56 Gear Package

This package uses a Reverse Cut Dana 35 Ring Gear

This kit Includes:

4.56 Ring & Pinions
Notched Rear Cross Pin
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG F8.8-M35R-456R-K

Price $644.95*

Genuine Gear Package

P/N GG F88-D35R-456R-K

Price $512.89

Yukon Gear Package

P/N YG F8.8-M35R-456R

Price $400.00*

Genuine Gear Package

P/N GG F88-D35R-456R

Price $350.29

Kit may be different than shown

1998-2007 Ford Ranger 8.8/Dana 35 4.56 Gear Package

This package uses a Standard Cut Dana 35 Ring Gear

This kit Includes:

4.56 Ring & Pinions
Notched Rear Cross Pin
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG F8.8-M35-456-K

Price $561.04*

Genuine Gear Package

P/N GG F88-D35-456-K

Price $490.33

Yukon Gear Package

P/N YG F8.8-M35-456

Price $376.96*

Genuine Gear Package

P/N GG F88-D35-456

Price $322.49

Kit may be different than shown

Ford 8.8/ Jeep XJ-YJ Dana 30 Reverse Cut 4.56 Gear Package

This package is designed for the Ford Ranger enthusiasts using a Jeep Dana 30 front axle or Jeep enthusiast using a Ford 8.8 rear.

The Jeep Dana 30 gears are for the 1984-1999 Cherokee XJ or 1987-1996 Wrangler YJ.

NOTE: 1997 & Newer Wrangler TJ's use a standard cut, short pinion gear set. Use package below.

This kit Includes:

4.56 Ring & Pinions
Notched Rear Cross Pin
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG F8.8-D30R-456R-K

Price $547.11*

Genuine Gear Package

P/N GG F88-D30-456R-K

Price $472.30

Yukon Gear Package

P/N YG F8.8-D30R-456R

Price $370.96*

Genuine Gear Package

P/N GG F88-D30-456R

Price $322.49

Kit may be different than shown

Ford 8.8/ Jeep TJ Dana 30 4.56 Standard Cut 4.56 Gear Package

This package is designed for the Ford Ranger enthusiasts using a Jeep Dana 30 front axle or Jeep enthusiast using a Ford 8.8 rear.

The Jeep Dana 30 gears are for the 1997 & Newer Wrangler TJ's with a standard cut, short pinion gear set.

This kit Includes:

4.56 Ring & Pinions
Notched Rear Cross Pin
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG F8.8-D30S-456TJ-K

Price $542.44*

Genuine Gear Package

P/N GG F88-D30-456TJ-K

Price $489.21

Yukon Gear Package

P/N YG F8.8-D30S-456TJ

Price $370.96*

Genuine Gear Package

P/N GG F88-D30-456TJ

Price $334.85

Kit may be different than shown

Ford 8.8/ Dana 44 Standard Cut 4.56 Gear Package

These Dana 44 Gears only fit 3.91 & Up carriers.

Yukon's require different install kit for Jeep Rubicon.

This package is designed for the Ford Ranger enthusiasts using a standard cut Dana 44 front axle.

This package would be suited for the early Bronco standard cut Dana 44.

This kit Includes:

4.56 Ring & Pinions
Notched Rear Cross Pin
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG F8.8-D44-456-K

Price $574.14*

Genuine Gear Package

P/N GG F88-D44-456-K

Price $487.65

Yukon Gear Package

P/N YG F8.8-D44-456

Price $379.79*

Genuine Gear Package

P/N GG F88-D44-456

Price $322.49

Kit may be different than shown

Ford 8.8/ Dana 44 Standard Cut 4.56 Gear Package

These Dana 44 Gears only fit 3.73 and down carriers. These are also referred to as 'thick' gears.

Yukon's require a different install kit for Rubicon's.

This package is designed for the Ford Ranger enthusiasts using a standard cut Dana 44 front axle.

This package would be suited for the early Bronco standard cut Dana 44.

This kit Includes:

4.56 Ring & Pinions
Notched Rear Cross Pin
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG F8.8-D44-456T-K

Price $602.12*

Genuine Gear Package

P/N GG F88-D44-456X-K

Price $500.49

Yukon Gear Package

P/N YG F8.8-D44-456T

Price $407.74*

Genuine Gear Package

P/N GG F88-D44-456X

Price $335.34

Kit may be different than shown

Ford 8.8/ Dana 44 Reverse Cut 4.56 Gear Package

Not IFS (TTB). IFS requires a different install kit.

1993 & up Ford / Dodge requires a different install kit.

This package is designed for the Ford Ranger enthusiasts using a Ford Dana 44 reverse cut front axle.

This kit Includes:

4.56 Ring & Pinions
Notched Rear Cross Pin
Complete Installation Kit (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG F8.8-D44R-456R-K

Price $598.34*

Genuine Gear Package

P/N GG F88-D44-456R-K

Price $499.95

Yukon Gear Package

P/N YG F8.8-D44R-456R

Price $381.26*

Genuine Gear Package

P/N GG F88-D44-456R

Price $334.85

Kit may be different than shown

Ford 9-Inch / Dana 44 Reverse Cut 4.56 Gear Package

Not IFS (TTB). IFS requires a different install kit.

1993 & up Ford / Dodge requires a different install kit.

This kit Includes:

4.56 Ring & Pinions
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG F9-D44R-456R-K

Price $564.83*

Genuine Gear Package

P/N GG F9-D44-456R-K

Price $457.55

Yukon Gear Package

P/N YG F9-D44R-456R

Price $338.03*

Genuine Gear Package

P/N GG F9-D44-456R

Price $293.60

Kit may be different than shown

Ford 9-Inch / Dana 44 Standard Cut 4.56 Gear Package

These Dana 44 Gears only fit 3.91 & Up carriers.

Yukon's require different install kit for Rubicon's.

This kit Includes:

4.56 Ring & Pinions
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG 9-D44-456-K

Price $540.65*

Genuine Gear Package

P/N G/G F9-D44-456-K

Price $445.19

Yukon Gear Package

P/N YG 9-D44-456

Price $336.56*

Genuine Gear Package

P/N G/G F9-D44-456

Price $281.24

Kit may be different than shown

Ford 9-Inch / Dana 44 Standard Cut 4.56 Gear Package

These Dana 44 Gears only fit 3.73 and down carriers. These are also referred to as 'thick' gears.

Yukon's require different install kit for Rubicon's.

This kit Includes:

4.56 Ring & Pinions
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG 9-D44-456T-K

Price $568.61*

Genuine Gear Package

P/N G/G F9-D44-456X-K

Price $458.04

Yukon Gear Package

P/N YG 9-D44-456T

Price $364.52*

Genuine Gear Package

P/N G/G F9-D44-456X

Price $294.08

Kit may be different than shown

Dana 60 / Dana 60 Reverse Cut 4.56 Gear Package

Fits 4.10 and down carrier. Also referred to as 'thick' gears.

This kit Includes:

4.56 Ring & Pinions
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG D60-D60R-456R-T-K

Price $692.23*

Genuine Gear Package

P/N G/G D60-D60-456R-K

Price $625.81

Yukon Gear Package

P/N YG D60-D60R-456R-T

Price $424.84*

Genuine Gear Package

P/N G/G D60-D60-456R

Price $384.74

Kit may be different than shown

Dana 60 / Dana 60 Reverse Cut 4.88 Gear Package

Fits 4.10 and down carrier. Also referred to as 'thick' gears.

This kit Includes:

4.88 Ring & Pinions
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG D60-D60R-488R-T-K

Price $692.23*

Genuine Gear Package

P/N G/G D60-D60-488R-K

Price $608.83

Yukon Gear Package

P/N YG D60-D60R-488R-T

Price $424.84*

Genuine Gear Package

P/N G/G D60-D60-488R

Price $367.76

Kit may be different than shown

Dana 60 / Dana 60 Reverse Cut 5.13 Gear Package

Fits 4.10 and down carrier. Also referred to as 'thick' gears.

This kit Includes:

5.13 Ring & Pinions
Complete Installation Kits (Optional)

To view Yukon's Installation Guide, click HERE.

Yukon Gear Package

P/N YG D60-D60R-513R-T-K

Price $692.23*

Genuine Gear Package

P/N G/G D60-D60-513R-K

Price $656.46

Yukon Gear Package

P/N YG D60-D60R-513R-T

Price $424.84*

Genuine Gear Package

P/N G/G D60-D60-513R

Price $415.40